详细参数请点击查看PDF文件：TJ FullMusic PX4/n.pdf  (4.95 M)

Classification- Aubergine-type bulb of glass, a white ceramic base with four-prong bayonet golden pins, oxide coated filamentary, mesh plate or carbon plate triode. Application -Audio frequency amplifier where power outputs of approximately 4.5watts or less is required at relatively low plate voltages. Dimensions -Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1 and 2.

Nominal operating conditions and parameters Filament voltage* .............................4V Nominal filament current ................1A Plate voltage ......................................300V Grid voltage** ....................................-45V Plate current ......................................50mA Impedance ........................................830 ohm Amplification factor ..........................5.0 Mutual Conductance .....................6.0mA/V Grid current ...........................0.05 μ A *Alternating-current filament supply or Direct-current filament supply. **Alternating-current filament supply is used. The grid and plate returns should be connected to a center tap on the secondary of the filament transformer. Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament. Characteristics-Average characteristics Figure 3. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is alternating-current filament supply.

Fig 3

Limiting Operation Conditions for Safe Nor simultaneous ratings Maximum plate voltage ...................300 V Maximum plate dissipation ...............15W