详细参数请点击查看PDF文件：TJ FullMusic 2A3/n.pdf  (4.7 M)

Classification-Dome-type or Aubergine-type bulb of glass, a white ceramic base with four-prong bayonet gold pins , oxide coated filamentary, mesh plate ,cabon plate triode.
Application-Audio frequency amplifier where power outputs of approximately 3.5 watts or less is required at relatively low plate voltages.
Dimensions-Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1, 2 and 3.

Nominal operating conditions and parameters

Filament voltage..........................2.5 V
Nominal filament current...........2.5A
Plate voltage................................250V
Grid voltage..............................－45 V
Plate current................................60 mA
Amplification factor.....................4.2
Grid to plate transconductance..5.25mA/V
Grid current....................................0.05 μA
Plate resistance............................800 ohms
Load resistance............................2.5 k

*Alternating-current filament supply or Direct-current filament supply.
**Alternating-current filament supply is used. The grid and plate returns should be connected to a center tap on the secondary of the filament transformer.
***Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament.

Characteristics-Average characteristics

Figure 3. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is alternating-current filament supply.

Fig.3

Limiting Operation Conditions for Safe Nor-nor simultaneous ratings
voltage..............................................300 V
Maximum plate dissipation..........15 W